DIGICOM SYSTEMS
SCOUT PLUS (INTERNAL)
Card Type |
Modem, Fax |
Chip Set |
Unidentified |
I/O Options |
Line in (RJ-11), line out (RJ11) |
Maximum Modem Rate |
14.4Kbps |
Maximum Fax Rate |
9600bps |
Data Modulation Protocol |
Bell 212A, ITU-T V.22, V.22bis, V.32, V.32bis |
Fax Modulation Protocol |
V.27ter, V.29 |
Error Correction/Compression |
MNP5, V.42, V42bis |
Fax Class |
Class I & II |
Data Bus |
8-bit ISA |
CONNECTIONS | ||||||
Function |
Label |
Function |
Label | |||
RJ-11 line |
CN1 |
RJ-11 line |
CN2 |
USER CONFIGURABLE SETTINGS | ||
Function |
Label |
Position |
Normal operation enabled |
SW1/1 |
On |
Modem reset |
SW1/1 |
Off |
í Factory configured - do not alter |
SW1/2 |
Off |
SERIAL PORT ADDRESS | ||
Setting |
SW1/3 |
SW1/4 |
COM1 (3F8h) |
Off |
Off |
COM2 (2F8h) |
On |
Off |
COM3 (3E8h) |
Off |
On |
COM4 (2E8h) |
On |
On |
SUPPORTED COMMAND SET |
Basic AT Commands |
AT, A/, +++ |
A, E, H, M, 0, V, Z |
&F, &T, &Z |
S Registers |
S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, S18, S25, S26 |
Note: See MHI Help file for full command documentation. |
PROPRIETARY AT COMMAND SET
For a full command summary see DIGICOM SYSTEMS, SCOUT PLUS (EXTERNAL)