ACMEPOINT TECHNOLOGY CO., LTD.
COMMPOWER TPF-144C
Card Type |
Fax, Modem (asynchronous) |
Chip Set |
Unidentified |
Maximum Data Rate |
14.4Kbps |
Maximum Fax Rate |
14.4Kbps |
Data Bus |
PCMCIA Type II |
Fax Class |
Class I |
Data Modulation Protocol |
Bell 103/212A ITU-T V.21, V.22, V.22bis, V.32, V.32bis |
Fax Modulation Protocol |
ITU-T V.17, V.21CH2, V.27ter, V.29 |
Error Correction/Compression |
MNP5, V.42, V.42bis |
V1988
Proprietary AT Command Set
BIT MAPPED REGISTERS | ||
Register |
Default |
Function |
S14 |
N/A |
Bit mapped register |
S16 |
N/A |
Test modes |
S18 |
0 |
Test timer |
S21 |
N/A |
Bit mapped register |
S22 |
N/A |
Bit mapped register |
S23 |
N/A |
Bit mapped register |
S25 |
5 |
Detect DTR change |
S26 |
1 |
RTS to CTS delay |
S27 |
N/A |
Bit mapped register |
S30 |
10 |
Sleep timer |
S37 |
0 |
Maximum line speed |
S90 |
0 |
Inactivity timer |
S108 |
1 |
Retrain signal quality selector |
S109 |
62 |
Line speeds permitted |
EXTENDED AT COMMANDS | ||
Command |
Default |
Function |
\An |
3 |
Maximum block size for transmission |
\Bn |
N/A |
Break send |
\Cn |
0 |
Auto-reliable time buffer configuration |
\Gn |
0 |
Flow control |
\Jn |
0 |
Lock serial port |
\Kn |
5 |
Break type |
\Nn |
3 |
Connect mode |
\O |
N/A |
Initiate mnp reliable mode |
\Qn |
3 |
Flow control type |
\Tn |
0 |
Inactivity timer |
\U |
N/A |
Accept mnp reliable mode |
\Vn |
2 |
Extended result codes |
\Xn |
0 |
Xon/xoff pass-through |
\Y |
N/A |
Convert to mnp reliable mode |
\Z |
N/A |
Switch to normal mode |
%An |
13 |
Auto-reliable fallback character |
%Cn |
1 |
Compression |
%En |
1 |
Auto-retrain |
%Gn |
0 |
Rate negotiation |
%Qn |
N/A |
Line signal quality |
"Jn |
1 |
V.42bis - compression control |
"Hn |
3 |
V.42bis - maximum string length |
"On |
32 |
Unidentified |
-Cn |
0 |
Calling tone |
AT PLUS (+) COMMANDS | |
Command |
Function |
+FMFR? |
Report modem manufacturer |
+FMDL? |
Report product model |
+FREV? |
Report product revision |
+FFTn |
Fax transmit test |
+FRTn |
Fax receive test |