LANCAST
4320-11
Card Type |
Transceiver |
NIC Type |
Ethernet |
Network Transfer Rate |
10Mbps |
Topology |
Star |
Wiring Type |
Unshielded twisted pair, AUI transceiver via DB-15 port |
Data Bus |
External |
CONNECTIONS |
|||
Function |
Label |
Function |
Label |
RJ-45 UTP connector |
CN1 |
AUI transceiver via DB-15 |
CN2 |
USER CONFIGURABLE SETTINGS |
||
Function |
Label |
Position |
í Device operates on 10Base-T compatible hubs |
LINK |
On |
Device does not operate on 10Base-T compatible hubs |
LINK |
Off |
í Low Receipt Threshold set high |
LRT |
Off |
Low Receipt Threshold set low |
LRT |
On |
í Signal Quality Error signal disabled |
SQE |
Off |
Signal Quality Error signal enabled |
SQE |
On |
DIAGNOSTIC LED(S) |
|||
LED |
Color |
Status |
Condition |
PWR |
Unidentified |
On |
Power is being received from the DTE device |
PWR |
Unidentified |
Off |
Power is not being received from the DTE device |
TX |
Unidentified |
Blinking |
Data is being transmitted |
TX |
Unidentified |
Off |
Data is not being transmitted |
RX |
Unidentified |
Blinking |
Data is being received |
RX |
Unidentified |
Off |
Data is not being received |
COL |
Unidentified |
On |
Collision detected on network |
COL |
Unidentified |
Off |
No collision detected on network |
LINK |
Unidentified |
On |
UTP link is good |
LINK |
Unidentified |
Off |
UTP link is broken |
POL |
Unidentified |
On |
Polarity is good |
POL |
Unidentified |
Off |
Polarity is reversed |