IBM CORPORATION
TOKEN-RING 16/4 ADAPTER II
NIC Type |
Token-Ring |
Transfer Rate |
4/16Mbps |
Data Bus |
16-bit ISA |
Topology |
Ring |
Wiring Type |
Unshielded twisted pair Shielded twisted pair via DB-9 port |
Boot ROM |
Available |
BOOT ROM ADDRESS AND I/O BASE ADDRESS | |||||
Boot ROM |
I/O Address |
SW1/1 |
SW1/2 |
SW1/3 | |
C0000h |
86A0h |
On |
On |
On | |
C4000h |
96A0h |
Off |
On |
On | |
C8000h |
A6A0h |
On |
Off |
On | |
» |
CC000h |
B6A0h |
Off |
Off |
On |
D0000h |
C6A0h |
On |
On |
Off | |
D4000h |
D6A0h |
Off |
On |
Off | |
D8000h |
E6A0h |
On |
Off |
Off | |
DC000h |
F6A0h |
Off |
Off |
Off |
INTERRUPT REQUEST | |||
IRQ |
SW1/4 |
SW1/5 | |
2/9 |
On |
On | |
10 |
Off |
On | |
11 |
On |
Off | |
» |
15 |
Off |
Off |
WAIT STATE | ||
Setting |
SW1/6 | |
» |
Normal |
On |
Additional wait states added to I/O cycle |
Off | |
Note:If the card is installed in a fast computer, the card may need to slow down the I/O cycle by adding wait states. |
COMPATIBILITY MODE | ||
Setting |
SW1/7 | |
» |
Disabled |
On |
Enabled |
Off | |
Note:On some systems the data bus timing is not truly IBM PC/AT compatible. If the card is not initializing, enabling compatibility mode may allow the card to operate properly.
|
BOOT ROM | ||
Setting |
SW1/8 | |
» |
Disabled |
On |
Enabled |
Off |
DMA CHANNEL | |||
Channel |
SW1/9 |
SW1/10 | |
» |
Disabled |
Off |
Off |
DMA5 |
On |
On | |
DMA6 |
Off |
On | |
DMA7 |
On |
Off |
NETWORK SEGMENT SPEED | ||
Speed |
SW1/11 | |
» |
4Mbps |
On |
16Mbps |
Off | |
Note:All cards on the network segment must have this option set identically. |
CABLE TYPE | ||
Type |
SW1/12 | |
» |
Shielded twisted pair |
On |
Unshielded twisted pair |
Off |