BREEZECOM
SA-40 PRO.11
Card Type |
Network Interface Card |
NIC Type |
Ethernet |
Boot ROM |
Not available |
Radio Data Rate |
3Mbps |
Network Transfer Rate |
2Mbps |
Topology |
Ad-hoc, infrastructure |
Wiring Type |
Unshielded twisted pair |
Data Bus |
External |
CONNECTIONS | |||
Function |
Label |
Function |
Label |
RJ-45 UTP connector |
CN1 |
RJ-45 UTP connector |
CN4 |
RJ-45 UTP connector |
CN2 |
Monitor connector |
CN5 |
RJ-45 UTP connector |
CN3 | ||
Note: DC power connector is located along the side panel |
DIAGNOSTIC LED(S) | |||
LED |
Color |
Status |
Condition |
LED1 |
Unidentified |
On |
Power is on |
LED1 |
Unidentified |
Off |
Power is off |
LED2 |
Unidentified |
On |
Connected to access point |
LED2 |
Unidentified |
Off |
Not connected to access point |
LED3 |
Unidentified |
On |
Data is being transmitted |
LED3 |
Unidentified |
Off |
Data is not being transmitted |
LED4 |
Unidentified |
On |
High quality reception |
LED4 |
Unidentified |
Off |
Poor reception |
LED5 |
Unidentified |
On |
Medium quality reception |
LED5 |
Unidentified |
Off |
Poor reception |
LED6 |
Unidentified |
On |
Low quality reception |
LED6 |
Unidentified |
Off |
Very low quality reception |
MISCELLANEOUS TECHNICAL NOTES |
Unit may have two pre-installed antenna, or configured with two connectors for external antenna. |