C P - 3 4 2 CONNER
NO MORE PRODUCED Native| Translation
------+-----+-----+-----
Form 3.5"/HH Cylinders | 977| 805|
Capacity form/unform 42/ MB Heads | 5| 4|
Seek time / track 29.0/ ms Sector/track | 17| 26|
Controller IDE / AT Precompensation
Cache/Buffer KB Landing Zone
Data transfer rate 1.000 MB/S int Bytes/Sector 512
MB/S ext
Recording method RLL operating | non-operating
-------------+--------------
Supply voltage Temperature *C |
Power: sleep W Humidity % |
standby W Altitude km |
idle W Shock g |
seek W Rotation RPM
read/write W Acoustic dBA
spin-up W ECC Bit
MTBF h 20000
Warranty Month
Lift/Lock/Park YES Certificates
**********************************************************************
J U M P E R S
**********************************************************************
CONNER CP342 JUMPER SETTING
Jumper Setting
==============
Master
E6-E7 Closed
Single
E5-E7 Closed
Slave
E6 Closed
**********************************************************************
G E N E R A L
**********************************************************************
CONNER CP-342 + WD
Jumper Setting
==============
J8
+5-3-1+ +-----+ +-----+
Master |X * *| |* X *| |* X X|
E6-E7 Closed |X * *| |* X *| |* X X|WD DRIVE
+6-4-2+ +-----+ +-----+
Single Master Slave Slave
E5-E7 Closed
Slave
E6 Closed
Installation with a WD93024A/95024A/93028AD/93048AD!
WD drive must be configured as SLAVE!
Conner drive must be configured as MASTER!