C F A - 2 7 0 S CONNER NO MORE PRODUCED Native| Translation ------+-----+-----+----- Form 3.5"/SLIMLINE Cylinders 2805| | | Capacity form/unform 270/ MB Heads 2| | | Seek time / track 12.0/ 3.0 ms Sector/track | | | Controller SCSI2 SINGLE-ENDED Precompensation Cache/Buffer 256 KB SEGMENTED Landing Zone Data transfer rate 4.000 MB/S int Bytes/Sector 512 10.000 MB/S ext SYNC Recording method RLL 1/7 operating | non-operating -------------+-------------- Supply voltage 5/12 V Temperature *C 5 55 | -40 60 Power: sleep 0.9 W Humidity % 8 80 | 8 80 standby 0.9 W Altitude km -0.061 4.500| -0.061 4.500 idle 3.8 W Shock g 5 | 50 seek 5.0 W Rotation RPM 4500 read/write 4.8 W Acoustic dBA 38 spin-up W ECC Bit MTBF h 300000 Warranty Month Lift/Lock/Park YES Certificates ********************************************************************** L A Y O U T ********************************************************************** CONNER CFA-170S/270S/340S/540S CUSTOMER OPTIONS +---------------------------------------------------------+ | +T1|XX | +-+ || |XX | | | || |XX | | | || |XX I | | | ++ |XX N | +-+ E1-+ |XX T | +-+ |XX E | ++ |XX R | || |XX F | || |XX A |+-+SS GND || |XX C ||x|LED T2+ |XX E ||x| |XX |+-+ | |+-+S1 |XX ||x| | |XX Power |+-+S5 |xx +---------------------------------------------------------+ ^ | | | | | +---------------------------------------------+ -LED | S3 SS +LED S2 |RESERVED ++ GND | S1 | | | ++ |+--------------------------------+ +++++ ++++++++++ | | | +-++|| | | |||| |||||||||| ++++++++++|| | +--++++-++++++++++-+++++++++++| | | | | +---------------------------------------------------------------+ ********************************************************************** J U M P E R S ********************************************************************** CONNER CFA-170S/270S/340S/540S CUSTOMER OPTIONS Jumper Setting ============== S1-S3 SCSI ID ------------- +----------+-----------------------+ | SCSI ID | Jumpers | | | S3 | S2 | S1 | +----------+-------+-------+-------+ | 0 | OPEN | OPEN | OPEN | +----------+-------+-------+-------+ | 1 | OPEN | OPEN | CLOSED| +----------+-------+-------+-------+ | 2 | OPEN | CLOSED| OPEN | +----------+-------+-------+-------+ | 3 | OPEN | CLOSED| CLOSED| +----------+-------+-------+-------+ | 4 | CLOSED| OPEN | OPEN | +----------+-------+-------+-------+ | 5 | CLOSED| OPEN | CLOSED| +----------+-------+-------+-------+ | 6 | CLOSED| CLOSED| OPEN | +----------+-------+-------+-------+ | 7 | CLOSED| CLOSED| CLOSED| +----------+-------+-------+-------+ Termination and Jumpers ----------------------- E1 OPEN Terminator Power from Drive CLOSED Terminator Power from Interface Terminators T1, T2: Remove both unless the Drive is the last one on the SCSI Cable. NOTE: SCSI PARITY IS ALWAYS ENABLED!