D 3 7 6 1 NEC Native| Translation ------+-----+-----+----- Form 3.5"/HH Cylinders | 915| | Capacity form/unform 114/ MB Heads | 7| | Seek time / track 20.0/ ms Sector/track | 35| | Controller IDE / AT Precompensation Cache/Buffer 64 KB Landing Zone Data transfer rate 1.250 MB/S int Bytes/Sector 512 MB/S ext Recording method RLL operating | non-operating -------------+-------------- Supply voltage 5/12 V Temperature *C | Power: sleep W Humidity % | standby W Altitude km | idle 8.0 W Shock g | seek W Rotation RPM 3600 read/write W Acoustic dBA spin-up W ECC Bit MTBF h 30000 Warranty Month Lift/Lock/Park YES Certificates ********************************************************************** J U M P E R S ********************************************************************** NEC D3761 APPLICATION NOTE Jumper Settings =============== x = Factory default setting Drive Switching --------------- +------+ x MSI | xxxx | Drive C: (Master) SLV | o o | Drive D: (Slave) BSC | o o | x TRS | xxxx | Native/Translation mode FC | o o | FC- mode with 776 cylinder, 8 heads, +------+ 33 sectors Logical Parameter ----------------- BIOS Typ depending ********************************************************************** I N S T A L L ********************************************************************** NEC D3761 APPLICATION NOTE INSTALLATION PROCEDURE ====================== System Embedded Controller - Set up Type: AMI-BIOS: 31 (98MB) AWARD-BIOS: 30 (109MB) PHOENIX-BIOS: 35 (80MB) or USER Type 48/49 with physical parameters (not for NOVELL 2.15 / ELS - FDISK - FORMAT C:/S External Adapter ---------------- Adapter with no BIOS see above Adapter with BIOS: NCL 538/539 - Set up Type: Typ 3 (114MB) - FDISK - FORMAT C:/S SOFTWARE -------- DOS 3.30 and up NOVELL ELS I/II NOVELL 2.15 NOVELL 386 UNIX/XENIX Drive needs to be low level formatted if you do not work with physical parameter. Programs can be: - HDFORMAT - HARDPREP - INITFIX - WDFMT ********************************************************************** F E A T U R E S ********************************************************************** NEC NEC DRIVES INSTALLATION GUIDE DEC. 92 REV. A NEC drives ----------- The NEC IDE/SCSI drives are designed to work in the IBM AT and compatible systems and gurantee the operation with any standard IDE and SCSI Controller. Further, the NEC drives provide compatibility to the ATA/SCSI CAM and ANSI (X3-131-199x) standard as well as to all known operating systems.