ADAPTEC, INC.
AHA-1520, AHA-1522
|
Data
bus: |
16-bit, ISA |
Size: |
Half-length, full-height card |
Hard drives supported: |
Up to seven SCSI devices |
Floppy drives supported: |
Two 360KB, 720KB, 1.2MB or 1.44MB |
CONNECTIONS | |
Function |
Location |
34-pin data cable connector-floppy drive |
CN1 |
50-pin SCSI cable connector-internal |
CN2 |
50-pin SCSI cable connector-external |
CN3 |
USER CONFIGURABLE SETTINGS | |||
Function |
Location |
Setting | |
» |
Data transfer in DMA disabled |
J5/jumper 1 |
open |
Data transfer in DMA enabled |
J5/jumper 1 |
closed | |
» |
Boot enabled (Intercept INT19 call) |
J5/jumper 2 |
closed |
Boot disabled (INT19 normal) |
J5/jumper 2 |
open | |
» |
Synchronous negotiation enabled |
J5/jumper 5 |
closed |
Synchronous negotiation disabled |
J5/jumper 5 |
open | |
» |
Disconnect by target / INT15 enabled |
J5/jumper 6 |
closed |
Disconnect by target / INT15 disabled |
J5/jumper 6 |
open | |
» |
Factory configured - do not alter |
J5/jumpers 7 & 8 |
open |
USER CONFIGURABLE SETTINGS | |||
Function |
Location |
Setting | |
» |
SCSI parity check enabled |
J6/jumper 8 |
open |
SCSI parity check disabled |
J6/jumper 8 |
closed | |
» |
Floppy drive enabled |
J7/jumper 1 |
closed |
Floppy drive disabled |
J7/jumper 1 |
open | |
» |
Floppy drive Interrupt is IRQ6 |
J7/jumper 6 |
closed |
Floppy drive Interrupt is IRQ10 |
J7/jumper 7 |
closed | |
» |
Floppy drive-dual speed disabled |
J7/jumper 8 |
open |
Floppy drive-dual speed enabled |
J7/jumper 8 |
closed | |
» |
I/O port address 340h |
J9/jumper 5 |
open |
I/O port address 140h |
J9/jumper 5 |
closed |
SCSI ADDRESS | ||||
SCSI ID |
J6/jumper 1 |
J6/jumper 2 |
J6/jumper 3 | |
0 |
open |
open |
open | |
1 |
closed |
open |
open | |
2 |
open |
closed |
open | |
3 |
closed |
closed |
open | |
4 |
open |
open |
closed | |
5 |
closed |
open |
closed | |
6 |
open |
closed |
closed | |
» |
7 |
closed |
closed |
closed |
DMA CHANNEL | |||||||
DMA |
J6/6 |
J6/7 |
J8/1 & 5 |
J8/2 & 6 |
J8/3 & 7 |
J8/4 & 8 | |
7 |
closed |
closed |
closed |
open |
open |
open | |
6 |
open |
closed |
open |
closed |
open |
open | |
5 |
closed |
open |
open |
open |
closed |
open | |
» |
0 |
open |
open |
open |
open |
open |
closed |
INTERRUPT REQUEST | |||||||
IRQ |
J6/4 |
J6/5 |
J9/1 |
J9/2 |
J9/3 |
J9/4 | |
IRQ9 |
open |
open |
open |
open |
open |
closed | |
IRQ10 |
closed |
open |
open |
open |
closed |
open | |
» |
IRQ11 |
open |
closed |
open |
closed |
open |
open |
IRQ12 |
closed |
closed |
closed |
open |
open |
open |
BIOS ADDRESS | ||||
Address |
J9/jumper 6 |
J9/jumper 7 |
J9/jumper 8 | |
» |
DC000h |
closed |
closed |
closed |
C8000h |
open |
open |
closed | |
CC000h |
open |
closed |
closed | |
D8000h |
closed |
open |
closed | |
Disabled |
N/A |
N/A |
open |
FLOPPY DRIVE DMA - J7 | |||||
DRQ |
DACK | ||||
DMA |
Jumper 2 |
Jumper 3 |
Jumper 4 |
Jumper 5 | |
» |
DMA Channel 2 |
closed |
open |
closed |
open |
DMA Channel 3 |
open |
closed |
open |
closed |
MESSAGE SELECT MSG #0 - ADAPTEC HEADERMSG #1 - JUMPER CONFIG. INFO. MSG #2 - SCSI DEVICE INFO. MSG #3 - BOOT PROGRESS INFO.MSG #4 - ERROR MESSAGES | |||
Message |
JP5/jumper 3 |
JP5/jumper 4 | |
» |
Msg #0 and #4 |
open |
open |
Msg #0, #3 and #4 |
open |
closed | |
All messages displayed |
closed |
open | |
Msg #4 only |
closed |
closed |